Roofing Contractor in Belleville, NJ
Welcome to The Prime Build Construction
Honest pricing with no hidden charges – Call today for your FREE estimate
Belleville's housing is packed tight. Two- and three-family homes on narrow lots, built mostly between the 1920s and the 1950s, with maybe eight feet between your wall and your neighbour's. And nearly all of them share the same roof arrangement: a pitched roof over the front of the house and a flat or low-slope roof over the rear rooms and the back extension. That layout is the reason for most of the calls we get in this town. The place where the pitched roof meets the flat roof is the hardest part of the building to keep watertight, and it's where a previous roofer most likely took a shortcut. Prime Build Construction runs a mobile crew — call (862) 374-7900, we come to the house, get on the roof, photograph the problem and give you a written price.
Roofing Services We Provide in Belleville
At Prime Build Construction, we deliver more than quality craftsmanship—we provide dependable construction and roofing solutions that protect your property, enhance its value.
Roof Replacement
A Belleville replacement usually means the whole building — pitched front, flat rear, and the transition between them, done as one job by one crew. Split it between two contractors and when it leaks each one will point at the other. Details on roof replacement.
Roof Repair
The regulars: the pitched-to-flat transition, dormer sidewall flashing, chimney flashing that was caulked instead of properly stepped, and cracked pipe boots. We trace where water actually gets in rather than sealing above the stain. See roof repair.
Storm Damage, Chimney and Skylights
We also do siding, chimney flashing and crowns and skylights — helpful because on a Belleville two-family the leak is often the chimney or the siding rather than the roof at all.
Flat and Low-Slope Rear Roofs
This is the bulk of our Belleville work. The rear sections on these homes need a membrane — EPDM rubber or modified bitumen — properly terminated where it meets the pitched roof above and the walls on either side. What we find instead, over and over, is shingles laid on a slope too shallow to shed water, or a membrane that was never flashed into the wall and has been caulked annually ever since. See flat roof repair and replacement.
Storm Damage
Wind lifts membrane edges and shingle tabs every nor’easter, and heavy rain finds any flat roof with a blocked drain. We tarp fast and handle full storm damage repair with photographs documented for your insurer.
Help & Support
Don’t wait until small issues become costly repairs. Contact Prime Build Construction today for reliable service, honest advice, and a free estimate.
The Roofs We See Around Belleville
Silver Lake is dense and mostly two- and three-family, close to the Newark line and similar in character to Newark’s North Ward. Narrow lots, minimal driveways, flat rear roofs on nearly every building. Access planning matters as much as the roofing itself.
The Soho section and the streets off Union Avenue run a little more mixed — some singlefamily, some two-family, and a good number of homes on their second or third layer of shingles. When we tear those off we frequently find sheathing that’s been damp for years and needs replacing before anything new goes down.
Around Belleville Center and the Washington Avenue corridor, there’s more mixed-use and small apartment stock with genuine flat roofs, parapet walls and roof drains rather than gutters. Parapet and coping joints are usually the leak, not the field of the roof.
Up toward the Nutley line and the higher streets off Franklin, the lots widen slightly and single-family capes and colonials become more common — cleaner, more straightforward pitched replacements, typically one to two days.
Working on a Narrow Lot
If you’ve had a roof done in Belleville before, you know this is the real issue. Here’s how we handle it:
We look at access on the estimate visit, not on the morning of the job. Where the dumpster goes, where material gets staged, whether we need a street permit.
We talk to your neighbour before we start if our staging affects them. It costs ten minutes and prevents a week of friction.
We protect adjacent property. On lots this tight, tear-off debris lands on somebody else’s roof or car unless it’s planned for.
We keep your driveway usable where it’s physically possible, and tell you honestly when it isn’t.
How Working With Us Actually Works
- Call or text (862) 374-7900.
- We come out, usually within 24 to 48 hours, and get on the roof — front and rear.
- We show you the photographs and explain what’s failing and why.
- You get an itemised written estimate naming the materials.
- We pull the permit, do the work, magnet-sweep the property, and walk it with you.
No office, no showroom, no overhead built into your price.
Storm and Weather Damage in Belleville
Ponding on the flat rear roof after heavy rain, usually a blocked drain or scupper
Membrane edges and flashing lifting at the wall terminations after high wind
Ice dams at the eaves on the pitched front section
Ceiling stains that show up days after the storm, because water tracked along a joist before it appeared
If water’s coming in now, tell us on the call. Tarp first, diagnose second.
Permits and Inspections in Belleville
Roof replacement in Belleville requires a permit, and the work must be done by a contractor registered with the New Jersey Division of Consumer Affairs. We handle the permit and the inspection. On a two- or three-family this matters more, not less — unpermitted work on a rental shows up at sale and at insurance renewal.
Neighborhoods and ZIP Codes We Cover in Belleville
We work throughout Belleville, including Silver Lake, the Soho section, Belleville Center, the Franklin Street area, Union Avenue and the Washington Avenue corridor.
ZIP code: 07109
Nearby Areas We Cover
We’re across Essex County daily — see our pages for Newark and Bloomfield, or the full list of areas we serve.
Get a Free Roof Estimate in Belleville
Frequently Asked Questions
My house is pitched in the front and flat in the back. Do you do both?
Yes, and we do them as one job. That transition between the two is the most common leak point on Belleville homes, and it only gets handled properly when one crew is responsible for both surfaces.
There are shingles on my flat rear roof. Is that wrong?
Almost certainly. Asphalt shingles need a minimum pitch to shed water, and most rear roofs on these homes are well below it. Water sits, backs under the courses, and gets in. That surface should have a rubber membrane.
Can you get a dumpster onto my street?
Usually yes, with planning. On the tighter Silver Lake blocks we’ll work out placement and timing during the estimate visit and get a street permit if it’s needed.
Do you work on three-family and rental buildings?
Yes, regularly. We’ll coordinate tenant access and provide the itemised documentation you need for your records.
Do you have an office I can visit?
No — we’re mobile. We come to your property and you get the estimate there.
Do you work on three-family and rental buildings?
It depends on size, layer count, deck condition, and how much of the building is flat versus pitched. A single-family cape near the Nutley line is a very different number from a three-family in Silver Lake with a flat rear roof. We measure and inspect before quoting.
How many layers can be on a roof?
Code limits it, and in practice we almost always recommend a full tear-off on Belleville homes because the sheathing underneath needs inspecting. A third layer hides problems and adds weight to framing that’s a century old.
Are you licensed and insured?
Yes — registered with the New Jersey Division of
Consumer Affairs, carrying liability insurance and workers’ compensation. We provide the certificate before work starts.
How long does the job take?
A single-family pitched roof is usually one to two days. A twoor three-family with a flat rear section typically runs two to four, depending on access and deck condition.
Do you offer a warranty?
Yes — workmanship warranty on our labour plus the manufacturer’s material warranty, both in writing before we begin.